The AirTAC AirTAC SDA50X40N Compact Cylinder | 50mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø50mm bore and 40mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA50X40N is a double-acting single-rod compact cylinder engineered to deliver 981.7 N of push force and 824.7 N of pull force at 0.5 MPa. Its riveted assembly significantly reduces axial mounting depth compared to round-body units, making it highly effective for machinery where space footprint is critical. The unit operates at speeds between 30 and 500 mm/s.
This specific configuration features a 50 mm bore, a 40 mm stroke, and a PT1/4 port. The hard-anodized inner bore minimizes wear, while fixed NBR bumpers absorb kinetic energy at the stroke ends. This SKU is supplied without a piston magnet, meaning it cannot directly host AirTAC reed or electronic switches.
| Model | AirTAC SDA50X40N Compact Cylinder | 50mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø50 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Pushes medium-weight cartons off a main sorting line using its 981.7 N extend force, fitting neatly into tight transfer station frames.
Ejects formed plastic parts from low-clearance mold platens, where the short riveted body depth prevents interference with the press machinery.
Acts as a pneumatic stop for loaded pallets entering a wrap station, safely decelerating the load using its fixed NBR end bumpers.
When sizing this actuator, evaluate your force requirements carefully. Stepping down to the SDA40 yields 628.3 N of push at 0.5 MPa, whereas moving up to the SDA63 provides 1558.6 N. Based on the 981.7 N push figure at 0.5 MPa, the safe working load is approximately 589 N (about 60% capacity), translating to a vertical lift capability of roughly 50 kg with a 2:1 safety margin. To finalize your order, confirm the 50 mm bore, 40 mm stroke, PT1/4 port, female M10x1.5 rod thread, and the absence of a sensor magnet. Note that this cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; utilize an external rod lock or pilot-operated check valve for secure positioning.
Quick checklist
This double-acting cylinder provides 981.7 N push and 824.7 N pull at 0.5 MPa. At 0.7 MPa, push is 1374.4 N. The theoretical maximum push is 200 kgf at 1.0 MPa, with a proof pressure of 1.5 MPa.
No, this specific SKU lacks the internal piston magnet. To use AirTAC reed or electronic switches, you must select the -S option. Additionally, end-stop deceleration is handled by fixed NBR bumpers, not an adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.