The AirTAC SDA63X75SB Compact Cylinder | 63mm Bore is a genuine double-acting COMPACT (thin) air cylinder with a Ø63mm bore and 75mm stroke, PT1/4 air ports and a riveted short body that saves mounting depth. Sensor slots around the body accept magnetic switches for position sensing.
The AirTAC SDA63X75SB is a double-acting, single-rod compact cylinder engineered to deliver 1558.6 N of push force and 1401.5 N of pull force at 0.5 MPa. Its riveted body assembly significantly reduces axial mounting depth, providing a smaller machine footprint compared to traditional round-body alternatives. The unit includes a built-in piston magnet for position sensing and a male M18x1.5 threaded rod end for secure load coupling.
This model features a 63 mm bore, a 75 mm stroke, and a 20 mm piston rod. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, meaning high-energy cycles may require external shock absorption. The integrated magnet supports AirTAC reed or electronic switches mounted directly into the body grooves.
| Model | AirTAC SDA63X75SB Compact Cylinder | 63mm Bore |
|---|---|
| Series | SDA compact (thin) cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Specifications follow the official AirTAC SDA compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard). Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SDA | Compact (thin) double-acting cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard. Related SDA-family variants: SSA (single-acting push), STA (single-acting pull), SDAD (double rod), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Drives ejection pins on a 150-ton injection molding press, utilizing the 1558.6 N extend force to reliably strip finished plastic parts from the tool cavity.
Deploys a 75 mm stroke to fold heavy cardboard carton flaps in a continuous packaging line, where the fixed NBR bumper absorbs the end-stop impact at operating speeds.
When sizing this actuator, stepping down to the SDA50 yields 981.7 N of push force at 0.5 MPa, while stepping up to the SDA80 provides 2513.3 N. Be aware that a standard compact cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; maintaining vertical loads requires an external rod lock or a pilot-operated check valve. Confirm your ordering essentials: 63 mm bore, 75 mm stroke, PT1/4 port, male M18x1.5 rod thread, and the integrated magnet.
Quick checklist
This double-acting cylinder generates 1558.6 N push and 1401.5 N pull at 0.5 MPa, and 2182.1 N push with 1962.2 N pull at 0.7 MPa. The theoretical maximum push force is 318 kgf at 1.0 MPa, with an operating pressure range of 0.15-1.0 MPa and a proof pressure of 1.5 MPa.
It relies on a fixed NBR bumper at each end to decelerate the piston, which is not an adjustable air cushion or a braking lock; high-speed applications may need external shock absorbers. Because this unit includes the -S magnet, you can mount AirTAC reed or electronic switches in the body grooves for precise position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.