
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X10-10 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 0 to 10 mm directly on your machine. Retract travel remains full length, while the extend end is fine-tuned without shims or part changes.
Its short riveted body drastically reduces axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X10-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the extend endpoint on packaging lines during format changes, using the M16x1.5 adjuster to tune the stroke on the machine without swapping hardware.
It is ideal for setups requiring frequent on-machine stroke tuning or trial positioning within its 0-10 mm window.
Remember that a plain pneumatic cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift since the fixed bumper only decelerates near the end of travel and acts as a mechanical stop, not a lock. For suspended or vertical loads, incorporate an external rod lock or a pilot-operated check valve. Confirm your bore, 10 mm stroke, 10 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and the absence of a magnet for this configuration.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore cylinder uses a PT1/4 air port. The adjuster does not alter these force values.
Turning the external R (M16x1.5) screw shortens the extend endpoint by up to 10 mm, giving a usable extend range of 0-10 mm. This acts purely as a mechanical stop and does not lock the piston; if air is lost, the cylinder drifts, so use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.