verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 90 to 100 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke100 mm
  • Adjustable range90–100 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$103.72 $111.22Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B

The AirTAC SDAJ63X100-10B is a double-acting, double-rod compact cylinder featuring a 10mm external extend-stop window. An M16x1.5 adjustment screw lets you dial the outward stroke from 90 to 100mm directly on the machine, eliminating the need for shims or part swaps during commissioning.

This 63mm bore unit relies on a fixed NBR bumper at each end to decelerate the stroke, rather than an adjustable air cushion. Its short riveted body saves axial mounting depth where a longer profile cylinder will not fit, and the male M18x1.5 piston rod thread handles high thrust loads. Note that this SKU lacks a piston magnet, so it cannot support position sensing without switching to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke100 mm
Adjustable range90 – 100 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×100Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B Is Used

packaging

Carton Flap Folding

Adjust the outward stroke on-site to accommodate varying box heights, ensuring the male M18x1.5 rod contacts flaps accurately before taping.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B the Right Cylinder?

Stepping down to the SDAJ50 yields 981.7N, while stepping up to the SDAJ80 provides 2513.3N.

This configuration is ideal for setups requiring precise on-site stroke tuning between 90 and 100mm. It features a PT1/4 port, a 30-500mm/s speed range, and a male M18x1.5 rod thread. Remember that a plain cylinder does not hold position if air pressure is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 90–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B FAQ

The air port is PT1/4.

This screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss, so use an external rod lock for holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-10B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X100-10B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.