
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X100-30 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in R (M16x1.5) screw lets you dial the forward end-position anywhere between 70 and 100 mm directly on the machine, avoiding part swaps during setup.
This riveted-body design saves axial mounting depth where larger profile or round-body units will not fit. It runs on a PT1/4 port with a 20 mm piston rod, handling speeds of 30-500 mm/s. End-of-travel energy is managed strictly by a fixed NBR bumper that decelerates the stroke, rather than an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 100 mm to accommodate varying raw casting widths on a milling fixture without machining new spacers.
Set precise mechanical lower limits for tier stacking on a palletizer, relying on the fixed NBR bumper to absorb the impact of each layer.
When sizing this 63 mm bore, evaluate your force requirements both ways.
Choose this specific model if your fixture changeovers require frequent extend-depth tuning between 70 and 100 mm. Note that a plain SDAJ does not hold position on air loss or valve centering; the bumper only decelerates near the end. For suspended loads, specify an external rod lock or pilot-operated check valve. This SKU lacks the -S magnet for sensing and uses a female M10x1.5 rod thread.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the R (M16x1.5) screw mechanically shortens the forward stroke by up to 30 mm, allowing an extend range of 70 to 100 mm. It sets the physical stop position and does not alter the pneumatic force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.