
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 100 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X100-30B is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M16x1.5 adjustment screw lets you dial the extend stop down by 30 mm, yielding a usable forward range of 70 to 100 mm directly on the machine without swapping shims or parts. Retract remains at the full stroke length.
This model features a male M18x1.5 piston rod thread and a PT1/4 air port. Its short riveted body conserves axial mounting depth where larger profile cylinders cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Because this specific SKU lacks the -S magnet option, it cannot accept magnetic switches for position sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 100 mm |
| Adjustable range | 70 – 100 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 70-100 mm extend stop via the M16x1.5 screw to set precise pressing depths for 79.4 kg vertical assemblies without changing tooling.
Secure large workpieces by fine-tuning the clamping reach, relying on the compact riveted body to save axial space in tight machining cells.
Selecting this 63 mm bore involves sizing against its neighbors to ensure optimal force.
This unit is ideal for operators needing on-site stroke tuning during changeovers. Confirm your requirements for a 63 mm bore, 100 mm maximum stroke, 30 mm adjustment window, PT1/4 porting, and the male M18x1.5 rod thread. Note that a plain cylinder does not hold its load upon air loss or valve centering—the piston will drift, and the fixed bumper only decelerates near the end of the stroke. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 2182.1 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend end position by up to 30 mm, allowing you to set the forward stroke anywhere between 70 and 100 mm. This mechanical stop does not alter the cylinder's force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.