verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 100 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke100 mm
  • Adjustable range60–100 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$103.72 $111.22Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B

The AirTAC SDAJ63X100-40B is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that lets you dial the extend stop anywhere between 60 and 100 mm directly on the machine. This SKU uses a male-threaded M18x1.5 piston rod for secure external mounting.

Its short riveted body saves valuable axial depth where larger profile or round-body units will not fit, while a fixed NBR bumper decelerates the piston at the stroke extremes. Operating speed ranges from 30-500 mm/s, and the PT1/4 air port matches the 63 mm bore specification. Note that this specific model lacks a piston magnet, so it cannot support position sensing without upgrading to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke100 mm
Adjustable range60 – 100 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×100Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B Is Used

precision_manufacturing

Press Fit Tuning

Dial in the 60-100 mm extend stop during press fit commissioning to find the exact seating depth for 79.4 kg assemblies without swapping mechanical shims.

vertical_align_center

Vertical Lift Stops

Set precise upper travel limits for 935 N vertical lifting fixtures, ensuring the fixed NBR bumper catches the load safely at the exact 60-100 mm window boundary.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B the Right Cylinder?

Choose this 63 mm bore if your application demands that intermediate force level alongside on-site stroke tuning.

This configuration includes a 100 mm maximum stroke with a 40 mm adjustable window, a male M18x1.5 rod thread, and no piston magnet. Remember that the fixed NBR bumper only decelerates the end of travel; a plain cylinder does not hold a load if air pressure drops or the valve is centred. For suspended or vertical loads that must resist drift, integrate an external rod lock or a pilot-operated check valve into your circuit.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–100 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B FAQ

This 63 mm bore cylinder uses a PT1/4 air port.

Turning the M16x1.5 adjuster screw shortens the extend stroke by up to 40 mm, yielding a usable 60-100 mm range. The screw acts only as a mechanical stop and does not lock the piston; for load holding without live pressure, use an external rod lock or pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X100-40B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ63X100-40B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.