
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X150-20B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you shorten the forward end position on-site across a 130 to 150 mm window, eliminating the need for shims or part swaps during changeovers.
This specific SKU carries a 150 mm stroke, which exceeds the 130 mm standard maximum for a 63 mm bore, making it a non-standard, made-to-order item. The riveted body design minimizes axial mounting depth where space is tight. It includes a male M18x1.5 piston rod thread (-B option) for secure external mounting, and relies on a fixed NBR bumper at each end to decelerate the stroke. Note that this configuration lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X150-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 150 mm |
| Adjustable range | 130 – 150 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reset the extend position by turning the M16x1.5 adjuster screw between product batches, saving axial space with the compact riveted body in tight transfer lines.
When sizing this model, evaluate your force requirements bidirectionally.
Choose this unit if your fixture requires precise on-machine tuning of the extend position within the 130-150 mm range. Confirm your setup needs the male M18x1.5 rod thread and the PT1/4 air port. Remember that a standard cylinder does not hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
The R (M16x1.5) screw mechanically shortens the extend stroke from the 150 mm maximum down to 130 mm without changing the force. It is a stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss. Also, this SKU lacks a magnet for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.