
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X20-10B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop directly on your machine between 10 and 20 mm. The short riveted body drastically reduces axial mounting depth where larger profile or round-body units cannot fit.
This specific configuration includes a male-thread M18x1.5 piston rod for secure external mounting and uses a PT1/4 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X20-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 10 to 20 mm to clamp varying workpiece thicknesses on a machining fixture without fabricating new spacer plates.
Rapidly reconfigure product transfer heights during packaging line changeovers by turning the external stop screw to shorten the extend cycle.
If your application demands less force, stepping down to the SDAJ50 provides 981.7 N at 0.5 MPa; conversely, if you need substantially more thrust, the SDAJ80 offers 2513.3 N at 0.5 MPa. Choose this 63 mm bore when your changeover process requires precise on-site extend tuning within the 10 to 20 mm window.
Confirm the 63 mm bore, 20 mm maximum stroke, 10 mm adjustment window, and PT1/4 porting match your pneumatic layout. The male M18x1.5 rod thread (-B) must align with your tooling plate. Remember that a plain cylinder does not hold its load upon air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the stroke end. For suspended or vertical loads that must remain fixed without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The M16x1.5 screw mechanically shortens the extend stop by up to 10 mm, allowing an adjustable range of 10 to 20 mm without altering the output force. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; you would need the -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.