
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X25-20B is a compact double-acting double-rod cylinder built for applications requiring a precise extend endpoint. An external R (M16x1.5) adjustment screw lets you dial the forward stroke down from 25 mm to any position between 5 and 25 mm directly on the machine. This on-site tuning eliminates the need for shims or part swaps during changeovers.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. This specific SKU features a male-thread piston rod (M18x1.5) for secure tool mounting and uses a PT1/4 air port. End shock is managed by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion. Note that this base model lacks a piston magnet, so it cannot accept reed or electronic switches without the -S option.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 5 and 25 mm to seat clamps precisely against varying part geometries without machining custom spacers.
Quickly reposition the male M18x1.5 rod tooling for new product families, using the R thread to set the exact 5-25 mm forward reach.
The 63 mm bore offers a balanced theoretical maximum of 318 kgf at 1.0 MPa.
Choose this adjustable model if your fixture requires frequent trial positioning or setup-heavy line changeovers. Confirm your parameters match the 63 mm bore, 25 mm maximum stroke, 20 mm window, PT1/4 port, and male M18x1.5 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centering; the piston drifts and the bumper only decelerates near the stroke end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 20 mm, allowing you to set the forward stop anywhere between 5 and 25 mm. This SKU lacks a magnet, so it cannot use magnetic switches; choose the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.