
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X25-30 is a double-acting compact cylinder featuring an external M16x1.5 R-thread adjuster screw that dials the extend stop down from 25 mm to 0 mm directly on your machine.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. End-of-travel energy is managed solely by a fixed NBR bumper that decelerates the piston near the stroke end; it is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X25-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the machine during product changeovers, avoiding the need to swap shims or cylinder hardware for varying part heights.
Choose this model if your fixture requires on-site extend tuning between 0 and 25 mm without part changes.
Confirm your parameters: 63 mm bore, 25 mm maximum stroke, 30 mm adjustment window, and a PT1/4 air port. The rod end features a female M10x1.5 thread (or male M18x1.5 on the -B option) on a 20 mm rod. Crucially, a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end, so specify an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the M16x1.5 R-thread screw shortens the extend stroke by up to 30 mm, allowing the rod end to be set anywhere between 0 and 25 mm. It acts as a mechanical stop and does not alter the force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.