
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-10 is a compact double-acting double-rod cylinder engineered for applications requiring exact extend positioning. A built-in M16x1.5 adjustment screw modifies the outward stop length, yielding a usable travel range of 20 to 30 mm without swapping shims or components.
This model features a short riveted body that significantly reduces axial mounting depth, fitting easily into tight machine frames. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa across a temperature range of -20 to +70 C.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 20 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Allows technicians to micro-adjust the 20-30 mm extend stop directly on the machine frame to achieve perfect bearing seating without disassembling the pneumatics.
Provides a 10 mm tuning window for a sorting gate, accommodating different package sizes on the fly while delivering 1558.6 N of extend force at 0.5 MPa.
When sizing this 63 mm bore actuator, evaluate neighboring options for optimal force scaling. It is the correct choice when an installation requires on-site stroke tuning between 20 and 30 mm.
Confirm the 63 mm bore, 30 mm maximum stroke, 10 mm adjustment window, and PT1/4 porting match your pneumatic layout. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches. Furthermore, a standard cylinder cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end rather than locking it. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
The external M16x1.5 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 30 mm maximum down to 20 mm. This mechanism sets the end position but does not alter the force. It is not a mid-stroke lock, and the cylinder will not hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.