
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-20 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X30-20 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that lets you dial the extend stop anywhere between 10 and 30 mm directly on the machine. The short riveted body minimizes axial mounting depth, fitting easily where larger profile cylinders cannot.
End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating pressure ranges from 0.15 to 1.0 MPa, and the unit ports via a bore-fixed PT1/4 thread. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X30-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend position between 10 and 30 mm on the fly to accommodate different product widths without swapping shims or cylinders.
Fit the short riveted body into tight machine frames and use the mechanical stop to set precise pressing depths for assembly operations.
Choose this cylinder if your application requires frequent changeovers or trial positioning, as the M16x1.5 screw allows on-site extend tuning from 10 to 30 mm without part swaps. Remember that the fixed NBR bumper only decelerates the stroke end and does not act as a lock; if you need to hold a load vertically during air loss or valve centering, you must add an external rod lock or pilot-operated check valve. Confirm your bore, 30 mm maximum stroke, 20 mm window, PT1/4 port, female M10x1.5 rod thread, and lack of a magnet before ordering.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend stroke by up to 20 mm, giving a usable range of 10 to 30 mm without changing force. This specific SKU has no piston magnet, so you cannot mount reed or electronic switches unless you select the -S option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.