
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X35-10B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down from its 35 mm maximum to a 25 mm minimum directly on the machine, eliminating the need for shims or part swaps. This on-site tunability makes it exceptionally practical for trial positioning and frequent changeovers.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders will not fit. This specific SKU includes a male M18x1.5 piston rod and lacks a piston magnet, meaning it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Set a precise lower mechanical stop for a 79.4 kg vertical lift fixture, using the male M18x1.5 rod to absorb impact while the fixed NBR bumper decelerates the end of stroke.
Quickly adjust the extend endpoint on-site between product runs without swapping cylinders, relying on the M16x1.5 adjuster screw to hit intermediate positions.
Choose this 25-35 mm adjustable model if your fixture setup requires precise extend-position tuning during commissioning.
Confirm your parameters match the bore (63 mm), maximum stroke (35 mm), and 10 mm adjustment window. This variant uses a PT1/4 port, features a male M18x1.5 rod thread, and has no magnet. Note that a plain cylinder does not hold its load if air pressure is lost or the valve is centred—the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external R (M16x1.5) screw mechanically shortens the extend stop. You can set the forward stroke anywhere between 25 mm and the full 35 mm. The retract stroke remains full, and the adjuster acts only as a stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.