
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X35-40S is a double-acting compact cylinder featuring a 63mm bore and an external adjustable extend stop. An M16x1.5 R screw lets you dial the extend position from 0 to 35mm directly on the machine, removing the need for shims or part swaps during setup.
The short riveted body significantly reduces axial mounting depth compared to round-body alternatives, fitting into tight footprints. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X35-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 35 mm |
| Adjustable range | 0 – 35 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 0-35mm extend stop during tooling changeovers to accommodate varying part thicknesses without manufacturing custom spacers.
Adjust the extend endpoint on the fly for different box dimensions, relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500mm/s.
Operators who require frequent trial positioning or rapid changeover will benefit from the on-site stroke tuning.
Configuration to verify: 63mm bore, 35mm stroke, 40mm adjust window, PT1/4 port, built-in magnet (S), and female M10x1.5 rod-end thread. Note that a plain cylinder does not hold position if air is lost or the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 318kgf at 1.0MPa.
The M16x1.5 R screw shortens the extend stop by up to 40mm, allowing a usable extend range of 0-35mm. The built-in magnet (-S) enables position sensing using AirTAC reed or electronic switches mounted in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.