
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X40-10B is a compact double-acting double-rod cylinder featuring an external extend stop. An M16x1.5 adjuster screw lets you dial the outward stroke down by 10 mm directly at the machine, yielding a usable extend range of 30 to 40 mm without changing parts. Retract travel remains full length.
The short riveted body saves axial mounting depth where round-body units will not fit, while a fixed NBR bumper decelerates the end of travel. This SKU uses a male M18x1.5 piston rod and lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M16x1.5 screw to fine-tune the 30-40 mm extend stop during press-fit setups, hitting exact insertion depths without swapping shims.
Restrict the upward travel of a 79.4 kg vertical lift mechanism precisely, using the mechanical stop to prevent overshoot into upper fixtures.
If your application demands even more force, the SDAJ80 jumps to 2513.3 N.
Choose this cylinder when you need on-site stroke tuning for trial positioning or frequent changeovers. Confirm the 63 mm bore, 40 mm maximum stroke, 10 mm adjust window, PT1/4 air port, and the male M18x1.5 rod thread suit your tooling. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The external R screw shortens the extend stop by up to 10 mm, giving a usable range of 30 to 40 mm. It is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss without an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.