verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke40 mm
  • Adjustable range0–40 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$83.97 $91.47Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S

The AirTAC SDAJ63X40-40S is a compact double-acting double-rod cylinder featuring an external M16x1.5 R-thread adjuster screw. This mechanism lets you dial the extend stop down by up to 40 mm directly on the machine, yielding a usable extend range of 0-40 mm without swapping shims or parts. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit.

The unit relies on a fixed NBR bumper at each end to decelerate the stroke and includes a built-in magnet for AirTAC reed or electronic switches.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke40 mm
Adjustable range0 – 40 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×40Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S Is Used

precision_manufacturing

Multi-Product Machining Lines

Dial the extend stop between 0 and 40 mm during product changeovers to position parts accurately without fabricating custom spacers.

sync_alt

Trial Positioning Rigs

Iterate on the extend endpoint during prototype assembly by turning the M16x1.5 screw until the optimal transfer distance is found.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S the Right Cylinder?

Choose this specific variant when frequent changeovers demand on-site extend tuning between 0 and 40 mm.

Confirm the 63 mm bore, 40 mm maximum stroke, 40 mm adjustment window, and PT1/4 air port. This unit includes the -S magnet for sensing and a female M10x1.5 rod-end thread. Remember that a plain cylinder drifts when air is lost or the valve is centred; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S FAQ

It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.

The external R (M16x1.5) screw shortens the extend endpoint by up to 40 mm, giving a usable 0-40 mm range without changing force. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X40-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X40-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.