
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X45-10B is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the extend end-position on-site between 35 and 45 mm without changing parts.
The short riveted body saves valuable axial mounting depth where larger profile or round-body cylinders will not fit. This specific SKU includes a male-threaded M18x1.5 piston rod for secure external mounting and operates with a PT1/4 air port. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Allows operators to fine-tune the 35-45 mm extend stop on the machine to perfect a delicate bearing press fit without swapping mechanical shims.
Speeds up production line changeovers by letting technicians quickly readjust the extend endpoint within the 10 mm window for different fixture heights.
When sizing this 63 mm bore, evaluate your force requirements carefully.
This model is ideal for setups requiring on-site stroke tuning during commissioning or tooling changeovers. Confirm your parameters: 63 mm bore, 45 mm maximum stroke, 10 mm adjust window, PT1/4 port, male M18x1.5 rod thread, and no piston magnet. Note that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The external M16x1.5 screw acts as a mechanical stop, allowing you to shorten the extend stroke anywhere from 45 mm down to 35 mm without affecting force. This SKU lacks a piston magnet, so it cannot take a magnetic switch; adding the -S option enables reed or electronic sensing. The screw is not a mid-stroke lock, and the cylinder will not hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.