verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke45 mm
  • Adjustable range0–45 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$75.13 $82.63Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50

The AirTAC SDAJ63X45-50 is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop down to any position between 0 and 45 mm on-site. The short riveted body significantly reduces axial mounting depth compared to conventional round-body units.

End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, and the unit cycles at speeds of 30-500 mm/s. This specific SKU lacks a piston magnet, so position sensing is not supported without upgrading to an -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke45 mm
Adjustable range0 – 45 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×45Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50 Is Used

conveyor_belt

Variable Format Diverter

Adjust the extend stop on-site to accommodate different package widths on a packaging line, using the mechanical M16x1.5 screw to set the exact divert position.

vertical_align_center

Vertical Lift Stop Tuning

Set the exact raise height for a 79.4 kg payload lift, utilizing the adjustable stop to test multiple elevation points before finalizing the assembly sequence.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50 the Right Cylinder?

Engineers requiring frequent line changeovers or trial positioning will benefit from the 0-45 mm extend tuning window.

Confirm the 45 mm maximum stroke, 50 mm adjustment window, PT1/4 port, and female M10x1.5 rod-end thread for your mounting interface. Note that a plain SDAJ does not hold position if air pressure drops or the valve centers; the piston drifts, and the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must remain secure without live pressure, specify an external rod lock or a pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50 FAQ

At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.

The external M16x1.5 screw shortens the extend stop by up to 50 mm, allowing the rod to be dialed anywhere between 0 and 45 mm. The screw sets the mechanical stop position and does not alter the output force or lock the piston mid-stroke.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X45-50

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X45-50 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.