
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X50-20B is a double-acting compact cylinder featuring a male-thread M18x1.5 piston rod and an external extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 30 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 50 mm.
The short riveted body minimizes axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 50 mm to accommodate varying raw stock thicknesses on a milling fixture without machining new spacers.
Set precise upper travel limits for a 79.4 kg vertical lift rig, using the mechanical stop to prevent over-travel.
Choose this specific SKU when your fixture requires on-site stroke tuning across a 30-50 mm window. It includes the -B male M18x1.5 rod thread and uses a PT1/4 port. Note that this base unit lacks a piston magnet, so it cannot accept magnetic switches; add the -S option if sensing is required. Furthermore, a plain cylinder does not hold a load on air loss or valve centering—install an external rod lock or pilot-operated check valve for suspended loads.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the M16x1.5 external screw shortens the extend stroke by up to 20 mm, allowing on-machine tuning between 30 and 50 mm. The screw acts as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.