
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-40 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X50-40 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 10 to 50 mm directly on your equipment. Retract travel stays at the full 50 mm.
Its short riveted body drastically reduces axial mounting depth compared to round-body alternatives, fitting into tight high-force machinery spaces. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly readjust the mechanical stop on packaging lines when switching container sizes, saving setup time while maintaining a 79.4 kg vertical lift capacity.
Utilize the short riveted body to fit high-force clamping into dense automated cells, relying on the fixed NBR bumper to absorb the 0.5 MPa impact.
Choose this model if your fixture requires frequent on-machine stroke tuning across a 10 to 50 mm window without swapping shims. Confirm the PT1/4 air port, the female M10x1.5 rod-end thread, and the 40 mm adjustment range suit your spatial limits. Crucially, a standard cylinder drifts when air is lost or the valve centers—the fixed bumper only decelerates the end stroke and does not lock the load, so integrate an external rod lock or pilot-operated check valve for holding requirements.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum output is 318 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend stroke anywhere between 10 and 50 mm. This sets a mechanical stop and does not alter the force. The cylinder cannot hold a load on air loss—the bumper only decelerates near the end of travel, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.