
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 10 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X50-40B is a compact double-acting double-rod cylinder built for applications requiring a variable extend endpoint. An external R (M16x1.5) adjustment screw lets you dial the forward stop from 10 to 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
This 63 mm bore unit features a male M18x1.5 threaded piston rod (Ø20 mm) for direct mounting, operating via a PT1/4 air port. The short riveted body saves valuable axial mounting depth where larger profile or round-body cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X50-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 50 mm |
| Adjustable range | 10 – 50 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the mechanical stop on-site to accommodate different package sizes on a packaging line, saving axial space with the compact riveted body.
Stepping down to the SDAJ50 yields 981.7 N, which may be insufficient for heavier payloads, while stepping up to the SDAJ80 provides 2513.3 N for high-mass transfer.
This cylinder is ideal for operators who need on-site stroke tuning between 10 and 50 mm to fine-tune pressing or clamping depth. Confirm your requirements for a 63 mm bore, 50 mm maximum stroke, 40 mm adjust window, PT1/4 porting, male M18x1.5 rod thread, and no magnet. Remember that a plain double-acting cylinder does not hold position if air pressure drops or the valve centers; for load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The external adjuster does not alter these force figures.
The R (M16x1.5) screw mechanically shortens the extend stroke by up to 40 mm, yielding a 10 to 50 mm usable range. It is a hard stop, not a mid-stroke lock; the cylinder cannot hold a load if air is lost. Also, this SKU has no magnet, so it cannot use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.