
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M16x1.5) screw lets you dial the forward end-position between 45 and 55 mm directly on your machine, eliminating the need for shims or part swaps during changeovers. Retract travel remains full length.
The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper decelerates the stroke end.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 45-55 mm insertion depth for bearing presses on the factory floor without swapping mechanical shims.
Adjust the forward stop on the fly to accommodate varying box heights, ensuring precise flap alignment during rapid changeovers.
Set a specific upper travel limit for a 79.4 kg vertical lift fixture, relying on the mechanical stop to prevent over-travel.
Choose this specific unit when your fixture requires on-site stroke tuning within the 45-55 mm window. Confirm your setup needs a female M10x1.5 rod-end thread, a PT1/4 air port, and no piston magnet. Note that a plain cylinder cannot hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the M16x1.5 adjuster screw shortens the extend stroke by up to 10 mm, allowing you to set the forward stop anywhere between 45 and 55 mm. This SKU lacks the -S magnet option, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.