
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 35 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X55-20 is a compact double-acting double-rod cylinder engineered for applications requiring precise extend positioning. An external M16x1.5 adjuster screw lets you dial the forward stop directly on the machine, shortening the stroke anywhere between 35 and 55 mm without swapping shims or parts.
The short riveted body conserves valuable axial mounting depth where larger profile or round-body units cannot fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, absorbing shock reliably within the 30-500 mm/s operating speed range. Please note this specific SKU lacks a piston magnet and therefore cannot support reed or electronic sensing.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X55-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 55 mm |
| Adjustable range | 35 – 55 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 35-55 mm extend stop to precisely set forming depth on short-run pressing tasks without manufacturing new spacers.
When sizing this unit, evaluate your force requirements bidirectionally.
Operators who frequently retool machinery or require trial positioning will benefit most from the 20 mm on-site adjustment window. Confirm your bore (63 mm), maximum stroke (55 mm), adjustment range (20 mm), and PT1/4 porting match your pneumatic layout. Remember that the fixed NBR bumper decelerates the stroke end but does not act as a lock; if you need to hold a load vertically during air loss or valve centering, you must integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
It operates between 30-500 mm/s at pressures from 0.15 to 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend end-point anywhere from 55 mm down to 35 mm. The screw acts only as a mechanical stop and does not alter the bore's output force. It cannot hold a load mid-stroke if air pressure is lost; use an external rod lock for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.