
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-20B is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. It features a male-thread M18x1.5 piston rod and a 20mm adjustment window, allowing you to dial the extend stop precisely between 40 and 60 mm directly on the machine.
The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. Deceleration at the stroke ends relies on a fixed NBR bumper rather than an adjustable air cushion. This SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing capabilities.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M18x1.5 rod end position on the fly when switching conveyor product sizes, saving axial space with the short riveted body.
When sizing this 63 mm bore, evaluate your force requirements carefully. It is ideal for operators needing on-site stroke tuning during changeovers.
Confirm the bore, 60 mm maximum stroke, 20 mm window, and PT1/4 port. This variant includes the -B male M18x1.5 rod thread and no magnet. Remember that a plain cylinder does not hold its load on air loss or valve centering—the piston drifts, and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
The external R (M16x1.5) screw mechanically shortens the extend stop by up to 20 mm, giving a usable extend range of 40 to 60 mm. It sets the end position without changing the force, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.