
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-30B is a compact double-acting double-rod cylinder featuring an external R (M16x1.5) adjuster screw. This mechanism lets you dial the extend stop down from the 60mm maximum to 30mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body significantly saves axial mounting depth where a larger profile cylinder will not fit. This specific SKU includes a male-threaded M18x1.5 piston rod and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to the -S variant. End-of-stroke deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the 30-60mm extend window to fine-tune the pressing depth of 79.4 kg assemblies on the fly, avoiding part changes during initial tooling commissioning.
Set precise extend limits for vertical lifting tasks under 935 N, relying on the fixed NBR bumper to absorb the end shock as the load reaches the target elevation.
Stepping down to the SDAJ50 yields 981.7 N, while stepping up to the SDAJ80 provides 2513.3 N.
Choose this male-rod (-B) configuration when your tooling requires an M18x1.5 threaded attachment point. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 60mm stroke, 30mm window, PT1/4 port, and male rod thread before ordering.
Quick checklist
Turning the external R (M16x1.5) screw shortens the extend stroke anywhere between 30mm and 60mm without changing the force. The screw is a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.