
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-40 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-40 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can dial the forward stroke down by up to 40 mm directly on the machine, yielding a usable extend range of 20 to 60 mm without swapping shims or parts.
Its short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the piston near the end of travel; it is not an adjustable air cushion or a braking lock. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the stroke length on-site to accommodate different package sizes on a packaging line without changing out the entire actuator body.
When sizing this unit, evaluate both neighbouring bores against your real force needs.
Choose this model if your fixture requires frequent on-site stroke tuning between 20 and 60 mm during changeovers. Confirm your setup needs a 63 mm bore, 60 mm max stroke, 40 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and no magnet. Because a plain cylinder drifts when air is lost or the valve is centred, integrate an external rod lock or pilot-operated check valve if you must hold a suspended load.
Quick checklist
At 0.7 MPa, push increases to 2182.1 N and pull to 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the R (M16x1.5) external screw mechanically shortens the extend end position by up to 40 mm, giving an effective forward travel of 20 to 60 mm. It sets the physical stop and does not alter the pneumatic force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.