
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X60-40B is a compact double-acting double-rod cylinder featuring an on-site extend stop. By turning the external M16x1.5 adjuster screw, you can trim the forward stroke anywhere between 20 and 60 mm without swapping shims or components.
Built with a short riveted body, this design drastically cuts axial mounting depth where a larger profile cylinder cannot fit. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but does not act as a mid-stroke lock or adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X60-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Speed up product family changeovers on packaging lines by turning the M16x1.5 adjuster to shift the extend endpoint on the fly.
When sizing this unit, evaluate the neighbouring bores using 0.5 MPa push figures. Stepping down, the SDAJ50 yields 981.7 N, whereas stepping up to the SDAJ80 provides 2513.3 N, making this 63 mm model a balanced middle ground for moderate payloads.
Choose this adjustable variant if your fixture requires frequent changeovers or trial positioning. Confirm your parameters: 63 mm bore, 60 mm max stroke, 40 mm window, PT1/4 port, male M18x1.5 rod, and no magnet. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 60 mm maximum down to 20 mm. It does not alter force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.