
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X65-10B is a double-acting compact cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop from 55 to 65 mm directly on your machine.
Its short riveted body minimizes axial mounting depth where space is tight, while the fixed NBR bumper decelerates the stroke end. This specific SKU uses a male M18x1.5 piston rod thread and lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X65-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Use the 55-65 mm extend range to micro-adjust pressing depth on bearing insertion lines, preventing over-travel without swapping shims.
Speed up product changeovers on packaging equipment by turning the M16x1.5 screw to shift the extend endpoint for different carton sizes.
Choose this 63 mm bore with its 10 mm adjustment window for setups needing precise 55-65 mm extend tuning during commissioning. Confirm the PT1/4 port, male M18x1.5 rod, and absence of a magnet. Note that a plain cylinder drifts on air loss; the bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M16x1.5 screw shortens the extend stroke by up to 10 mm, yielding a 55-65 mm usable range without changing force. The -B code indicates a male M18x1.5 piston rod thread, and this SKU lacks a magnet for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.