verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 70 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke70 mm
  • Adjustable range60–70 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$87.43 $94.93Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10

The AirTAC SDAJ63X70-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M16x1.5) screw, you can shorten the forward stroke by up to 10 mm, dialling the rod end precisely between 60 and 70 mm directly on your machine without changing parts.

This riveted-body design saves significant axial mounting depth where a larger profile or round-body unit will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the PT1/4 air port accommodates straightforward pneumatic integration.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke70 mm
Adjustable range60 – 70 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×70Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10 Is Used

precision_manufacturing

Machining Clamp Tuning

Dial in the exact 60-70 mm clamping reach on machining fixtures to accommodate raw material thickness variations without swapping cylinders.

packaging

Carton Flap Folding

Adjust the folding arm stop in 1 mm increments during packaging line changeovers to handle various box heights perfectly.

vertical_align_center

Vertical Lift Dampening

Set a precise lower mechanical stop for vertical lifts carrying up to 79.4 kg, ensuring consistent placement without over-travel.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10 the Right Cylinder?

Stepping down to an SDAJ50 yields 981.7 N, whereas stepping up to an SDAJ80 provides 2513.3 N. Choose this specific SKU if your fixture requires on-site stroke tuning within the 60-70 mm window.

Confirm your parameters: 63 mm bore, 70 mm maximum stroke, 10 mm adjuster window, PT1/4 port, and a female M10x1.5 rod-end thread. Note that this configuration lacks a piston magnet, so it cannot accept reed or electronic switches. Furthermore, a plain cylinder does not hold position or load when air is lost or the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, utilize an external rod lock or pilot-operated check valve.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 60–70 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10 FAQ

The external M16x1.5 adjuster screw mechanically limits the extend stroke, allowing you to set the rod end anywhere between 60 and 70 mm. It does not alter the force and is not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-10

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X70-10 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.