
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-30B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 40 and 70 mm without changing parts.
The short riveted body saves axial mounting depth where a larger profile cylinder will not fit. This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 40 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rotate the M16x1.5 screw to shift the extend stop between 40 and 70 mm during product family changeovers, avoiding shim fabrication.
Dial the 63 mm bore outward stroke during initial jig setup to find the exact 40-70 mm contact point before locking the collar.
When sizing this 63 mm bore, evaluate both neighbours.
Choose this male-rod (-B) configuration when your tooling requires an M18x1.5 threaded attachment. The 40-70 mm adjust window is ideal for machines needing frequent changeovers. Remember that a standard cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve. Confirm your PT1/4 port and 30-500 mm/s speed range fit the application.
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
No, this specific SKU lacks the -S option, so it has no piston magnet and cannot host reed or electronic switches. You must select an -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.