
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-40 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-40 is a compact double-acting double-rod cylinder built around a short riveted body to save axial mounting depth in tight machinery. An external M16x1.5 adjuster screw lets you dial the extend end-position on-site across a 30 to 70 mm window without changing parts. Retract travel remains full length.
End shock is handled by a fixed NBR bumper that decelerates the stroke, though it is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for press stations needing exact insertion depth, letting technicians turn the M16x1.5 screw to set the extend stop anywhere from 30 to 70 mm during initial tooling setup.
Useful on packaging lines running mixed product sizes, where the extend position must shift quickly on the machine without swapping out the entire actuator body.
Operators who need frequent changeover or trial positioning benefit most from the 40 mm external adjustment window. Note that a plain cylinder does not hold its load if air is lost or the valve centres; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, stroke, window, PT1/4 port, female M10x1.5 rod thread, and lack of magnet for this configuration.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
This 63 mm bore model pushes 1558.6 N and pulls 1401.5 N at 0.5 MPa. At 0.7 MPa it pushes 2182.1 N and pulls 1962.2 N. The theoretical maximum push is 318 kgf at 1.0 MPa. It uses a PT1/4 air port and a 20 mm piston rod.
Turning the external R screw shortens the extend stop by up to 40 mm, giving a usable extend range of 30 to 70 mm. The screw is strictly a mechanical stop and does not alter force. It cannot hold a load mid-stroke if air pressure drops; use an external rod lock for that.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.