
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X70-40B is a compact double-acting cylinder featuring a male-thread piston rod (M18x1.5) and an external extend stop. By turning the R (M16x1.5) adjuster screw, you can dial the extend stroke down by up to 40 mm on the machine, achieving a usable extend range of 30 to 70 mm without swapping shims or parts. The retract stroke remains full length.
The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches; for position sensing, select the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X70-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Tune the extend stop during commissioning to deflect different package sizes accurately, using the male M18x1.5 rod to mount custom deflector arms.
This SDAJ63X70-40B fits squarely in the middle, providing a theoretical maximum push of 318 kgf at 1.0 MPa. It is the correct choice for setups requiring frequent on-machine stroke tuning between 30 and 70 mm during product changeovers.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or a pilot-operated check valve. Confirm your bore, 70 mm max stroke, 40 mm window, PT1/4 port, male M18x1.5 rod thread, and lack of magnet before ordering.
Quick checklist
This 63 mm bore cylinder features a PT1/4 air port.
The external M16x1.5 R screw mechanically shortens the extend stroke by up to 40 mm, allowing on-machine tuning between 30 and 70 mm without altering force. This SKU has no piston magnet, so it cannot take magnetic switches; you must specify the -S option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.