
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-20 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 55 and 75 mm directly on the machine, eliminating shims or part swaps during changeovers. Retract remains at the full 75 mm.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s. Note this SKU lacks a piston magnet and cannot take a magnetic switch.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M16x1.5 screw to set the exact 55-75 mm extend stop for varying cast iron fixture heights, securing parts with 1558.6 N of clamping force.
Adjust the forward position on the line to accommodate different box depths, relying on the fixed NBR bumper to decelerate the 30-500 mm/s travel.
Size both ways by comparing 0.5 MPa push force: stepping down to the SDAJ50 yields 981.7 N, while stepping up to the SDAJ80 provides 2513.3 N. Choose this unit when your fixture requires on-site stroke tuning within the 55-75 mm window.
Confirm the 63 mm bore, 75 mm maximum stroke, 20 mm adjust window, and PT1/4 port. This base SKU has no magnet for sensing; select the -S variant if you need reed or electronic switches. A plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
Turning the external M16x1.5 screw shortens the extend stroke by up to 20 mm, allowing the rod to stop anywhere between 55 and 75 mm. The screw sets the mechanical stop position and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.