
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-20S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. The short riveted body minimizes axial mounting depth, fitting easily where larger profile cylinders cannot.
By turning the R (M16x1.5) adjuster screw, you can dial the extend end-position anywhere between 55 and 75 mm directly on the machine. End shock is absorbed by a fixed NBR bumper, which decelerates the piston near the end of the stroke but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the diverting arm reach on the fly during product changeover, ensuring precise positioning using the built-in magnet for end confirmation.
Stepping down, the SDAJ50 provides 981.7 N; stepping up, the SDAJ80 yields 2513.3 N. Choose this unit when your fixture requires on-site stroke tuning across a 20 mm window.
Confirm the 63 mm bore, 75 mm max stroke, 20 mm adjust window, PT1/4 port, and the -S magnet for switch readiness. The rod end thread is female M10x1.5. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 1558.6 N and the pull force is 1401.5 N. At 0.7 MPa, push is 2182.1 N and pull is 1962.2 N. The theoretical maximum push force is 318 kgf at 1.0 MPa.
The R (M16x1.5) screw shortens the extend stroke by up to 20 mm, allowing usable travel between 55 and 75 mm; retract remains full. The -S option provides a built-in magnet for AirTAC reed or electronic switches, and the adjuster sets the stop, not the force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.