
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-30S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X75-30S is a compact double-acting double-rod cylinder engineered for on-site extend positioning. An external M16x1.5 adjustment screw lets you shorten the outward stroke by up to 30 mm, yielding a precise 45 to 75 mm travel window without swapping parts.
This 63 mm bore actuator features a space-saving riveted body that minimizes axial mounting depth where larger profile cylinders cannot fit. It carries a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches, operating at speeds between 30 and 500 mm/s. End-of-travel shock is managed strictly by a fixed NBR bumper, which decelerates the piston near the end point but does not function as an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 75 mm |
| Adjustable range | 45 – 75 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly reposition the extend endpoint on the machine without shims when switching between product families, relying on the 63 mm bore to deliver consistent 1401.5 N pull force.
When sizing this model, evaluate both neighboring bores against your force requirements.
Select this specific unit if your fixture requires frequent changeovers or trial positioning within the 45 to 75 mm extend band. The PT1/4 port and Ø20 mm rod are bore-fixed, and the included -S magnet enables position sensing. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and runs at speeds from 30 to 500 mm/s.
The external M16x1.5 screw mechanically shortens the extend stroke by up to 30 mm, providing an adjustable travel range of 45 to 75 mm without changing parts or affecting force. The included -S magnet allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for precise end-position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.