verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 25 to 75 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke75 mm
  • Adjustable range25–75 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$90.02 $97.52Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50

The AirTAC SDAJ63X75-50 is a compact double-acting double-rod cylinder featuring an external extend stop. A built-in M16x1.5 adjuster screw lets you dial the forward end-position anywhere between 25 and 75 mm directly on your equipment, eliminating the need for shims or part swaps during changeovers.

Because the adjuster dictates the mechanical stop rather than altering the piston area, output thrust remains identical to a standard SDA of this bore. The short riveted body conserves axial mounting depth, while a fixed NBR bumper handles end-of-stroke deceleration. Note this specific SKU lacks a piston magnet, so position sensing is not supported without switching to the -S variant.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke75 mm
Adjustable range25 – 75 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×75Maximum stroke length in mm.
-50Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50 Is Used

packaging

Variable Depth Sealing

Adjust the forward stop on the fly for different carton depths, using the fixed NBR bumper to absorb the impact of repetitive high-speed cycling.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50 the Right Cylinder?

When sizing this unit, evaluate your thrust requirements against its neighbours. Choose this model if your assembly requires frequent on-site stroke tuning within the 25-75 mm extend window.

Remember that a plain double-acting cylinder drifts when air is lost or the valve centres; the fixed bumper only decelerates the stroke end and the R screw is a mechanical stop, neither functions as a lock. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. This configuration specifies a 63 mm bore, 75 mm max stroke, 50 mm adjust window, PT1/4 port, female M10x1.5 rod thread, and no magnet.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–75 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50 FAQ

The M16x1.5 adjuster screw mechanically shortens the extend stroke by up to 50 mm, allowing end positions between 25 and 75 mm without affecting force. This specific SKU has no magnet; to use reed or electronic switches, you must select the -S magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X75-50

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ63X75-50 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.