
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-10 is a compact double-acting double-rod cylinder featuring an on-site extend stop. A built-in M16x1.5 adjuster screw lets you dial the outward travel down by 10 mm, providing a usable range of 70 to 80 mm without swapping shims or components.
This riveted-body design saves critical axial mounting depth where round-body or profile units will not fit. End shock is managed strictly by a fixed NBR bumper, which decelerates the piston rather than acting as a lock. Operating pressure spans 0.15 to 1.0 MPa, and the unit travels at 30-500 mm/s. Note this specific SKU lacks a piston magnet, so it cannot host reed or solid-state switches.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuation endpoint on packaging lines during product changeover, using the fixed NBR bumper to absorb the end-of-stroke shock reliably.
Stepping down to the SDAJ50 yields 981.7 N, whereas stepping up to the SDAJ80 provides 2513.3 N.
Choose this 63 mm bore if your fixture requires heavy push force combined with exact 70-80 mm extend tuning during commissioning. Confirm your parameters: 63 mm bore, 80 mm max stroke, 10 mm window, PT1/4 port, female rod thread, and no magnet. Remember that a plain cylinder drifts if air pressure drops; utilize an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
The theoretical maximum output is 318 kgf at 1.0 MPa.
The M16x1.5 screw mechanically shortens the extend endpoint from the 80 mm maximum down to 70 mm. It sets the stop position only and does not alter force. This SKU lacks a magnet; order the -S variant to use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.