
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 70 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X80-10B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. A front R (M16x1.5) screw lets you dial the outward stroke down from the 80 mm maximum to a 70 mm minimum without changing parts.
This variant uses a male M18x1.5 piston rod thread for direct mounting. The short riveted body saves valuable axial depth where larger profile or round-body units cannot fit. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion or a mid-stroke lock.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 80 mm |
| Adjustable range | 70 – 80 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 70-80 mm extend stop on the fly to set precise insertion depths for varying bearing sizes without swapping physical spacers.
Speed up product family changeovers by turning the M16x1.5 adjuster screw to shift the extend endpoint exactly 10 mm for a new fixture format.
When sizing this 63 mm bore actuator, consider the neighbouring capacities at 0.5 MPa.
Choose this unit when your fixture requires exact 70-80 mm outward positioning during commissioning or frequent changeovers. Confirm your requirements for the PT1/4 port, the 10 mm adjustment window, and the male M18x1.5 rod. Note that a plain cylinder drifts when air is lost or the valve centres; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 318 kgf at 1.0 MPa.
Turning the R (M16x1.5) screw mechanically shortens the extend endpoint from the 80 mm maximum down to 70 mm; it sets the stop and does not alter force. This specific SKU lacks a piston magnet, so it cannot take a switch; you must select an -S variant to use reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.