verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke80 mm
  • Adjustable range40–80 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$93.02 $100.52Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40

The AirTAC SDAJ63X80-40 is a compact double-acting double-rod cylinder built for tight axial spaces, featuring a short riveted body that easily fits where larger profile variants cannot. An external M16x1.5 adjustment screw lets you dial the extend stop directly on the machine, shortening the forward stroke by up to 40 mm to yield a usable 40-80 mm range without swapping shims or parts.

End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a mid-stroke locking device.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40 Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke80 mm
Adjustable range40 – 80 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×80Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40 Is Used

precision_manufacturing

Custom Clamp Positioning

Dial the extend stop from 40 to 80 mm to accommodate varying part widths on a machining fixture without fabricating new spacer blocks.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40 the Right Cylinder?

Choose this specific unit if your fixture requires frequent on-machine stroke tuning between 40 and 80 mm during product changeovers.

Confirm your parameters: 63 mm bore, 80 mm maximum stroke, 40 mm adjust window, PT1/4 port, and a female M10x1.5 rod-end thread on a 20 mm rod. Note that this SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Also, a plain cylinder drifts on air loss since the fixed bumper only decelerates near the end; utilize an external rod lock or pilot-operated check valve for secure load holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40 FAQ

The theoretical maximum push is 318 kgf at 1.0 MPa.

Turning the R (M16x1.5) screw mechanically shortens the extend endpoint from the 80 mm maximum down to 40 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ63X80-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.