verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 40 to 80 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke80 mm
  • Adjustable range40–80 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$104.65 $112.15Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S

The AirTAC SDAJ63X80-40S is a double-acting compact cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop anywhere between 40 and 80 mm directly on your equipment. Retract travel always uses the full length.

Its riveted body architecture minimizes axial mounting depth where larger profile variants fail to fit. The unit includes a built-in piston magnet for AirTAC reed or electronic switches, while fixed NBR bumpers absorb end-of-stroke shock. This cylinder operates at 30-500 mm/s and handles pressures up to 1.0 MPa.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke80 mm
Adjustable range40 – 80 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×80Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S Is Used

precision_manufacturing

Press Fit Calibration

Dial the extend stop from 40 to 80 mm during press fit commissioning to find the exact seating depth for 79.4 kg assemblies without machining new spacers.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S the Right Cylinder?

Choose the SDAJ63X80-40S when your fixture requires precise 40-80 mm extend calibration without swapping components.

Remember that a standard double-acting cylinder drifts if air pressure drops or the valve centres; the fixed bumper only decelerates motion near the end and the R screw acts as a mechanical stop, neither function locks the rod. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the PT1/4 port, 20 mm rod, female M10x1.5 rod-end thread, and the -S magnet specification.

AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 40–80 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S FAQ

The theoretical maximum output is 318 kgf at 1.0 MPa.

Turning the external R screw shortens the extend endpoint from the 80 mm maximum down to 40 mm without changing the force output. The -S option adds a piston magnet compatible with AirTAC reed or electronic solid-state switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X80-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ63X80-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.