
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-100 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-100 is a double-acting compact cylinder featuring a 63mm bore and an external R (M16x1.5) adjuster screw. This mechanism lets you dial the extend stop directly on your machine from 0 up to 85mm, eliminating the need for shims or part swaps during frequent format changes. Retract remains a full stroke, while the extend end-position is fully customizable within the 100mm window.
The short body design drastically saves axial mounting depth where larger profile or round-body cylinders cannot fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the end of travel but is not an adjustable air cushion.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 0 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-85mm extend stop on-site for pressing bearings, ensuring precise depth control without swapping out physical spacers.
Quickly adjust the extend position during packaging line size changeovers, using the M16x1.5 screw to hit new mechanical stops rapidly.
This SDAJ63X85-100 configuration is ideal for setups requiring substantial force alongside flexible extend positioning.
This specific SKU lacks a piston magnet (-S), so it cannot accept reed or electronic switches for position sensing. If your application requires the load to remain held during air loss or valve centering, note that the fixed bumper and mechanical stop will not lock the piston; you must integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the PT1/4 port, female M10x1.5 rod thread, and 0-85mm usable extend range before ordering.
Quick checklist
The external R (M16x1.5) screw shortens the extend stroke by up to 100mm, providing a usable extend range of 0-85mm. It acts strictly as a mechanical stop and does not alter the cylinder's force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.