verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 65 to 85 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke85 mm
  • Adjustable range65–85 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$95.81 $103.31Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B

The AirTAC SDAJ63X85-20B is a double-acting compact cylinder featuring a male-thread piston rod and an external extend stop. By turning the R (M16x1.5) adjustment screw, you can dial the forward end-position anywhere between 65 and 85 mm directly on your machine, eliminating the need for shims or part swaps. Retract travel remains full length.

The short riveted body saves axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper decelerates the stroke end. This SKU lacks a piston magnet, so it cannot accept a magnetic switch.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke85 mm
Adjustable range65 – 85 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×85Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B Is Used

factory

Compact Assembly Presses

Fit the short riveted body into tight machine frames, relying on the male M18x1.5 rod to secure tooling while tuning the 65-85 mm extend window.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B the Right Cylinder?

This model is ideal for setups needing on-site stroke tuning during commissioning or tooling changeovers.

Confirm the 63 mm bore, 85 mm maximum stroke, 20 mm window, and PT1/4 port. This SKU includes the -B option for a male M18x1.5 rod thread and has no -S magnet. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 65–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B FAQ

Turning the R (M16x1.5) screw shortens the extend stop by up to 20 mm, giving a usable forward range of 65-85 mm. The screw is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load on air loss without an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ63X85-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.