
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-30 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M16x1.5 adjuster screw lets you dial the outward stroke anywhere between 55 and 85 mm without changing parts.
Built with a short riveted body, this unit saves axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the extend stop quickly when swapping thick production tooling, letting the 63 mm bore deliver consistent clamping force while accommodating varied part heights.
Stepping down to an SDAJ50 yields 981.7 N, whereas stepping up to an SDAJ80 provides 2513.3 N. This 63 mm bore is optimal when you need substantial thrust but want to avoid the bulk of an 80 mm body.
Choose this configuration if your fixture requires frequent extend-position tweaking between 55 and 85 mm during setup. It uses a PT1/4 port and a female M10x1.5 rod end. Keep in mind the mechanical stop is not a mid-stroke lock; if air pressure drops, the piston drifts. To hold a load securely without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M16x1.5 screw mechanically shortens the extend stroke from the 85 mm maximum down to 55 mm. It acts only as a travel stop and does not lock the piston mid-stroke; load holding requires an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.