
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 55 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X85-30B is a double-acting compact cylinder featuring a male-thread piston rod (M18x1.5) and an external extend stop. By turning the R (M16x1.5) adjustment screw, you can dial the outward stroke down by up to 30 mm directly on the machine, yielding a usable extend range of 55 to 85 mm without swapping shims or parts. Retract remains full length.
Its short riveted body saves axial mounting depth where a larger profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and cannot support sensing switches; adding the -S option enables reed or electronic tracking.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 85 mm |
| Adjustable range | 55 – 85 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 55 to 85 mm via the R screw to accommodate varying raw casting thicknesses on a milling fixture without machining new spacers.
Choose this model if your fixture requires frequent on-site stroke tuning during changeovers.
Confirm the 63 mm bore, 85 mm maximum stroke, 30 mm adjust window, and PT1/4 air port. This variant includes the -B male M18x1.5 rod end and no magnet. Because it is a standard double-acting cylinder, it does not hold a load if air pressure drops or the valve centres—the fixed bumper only decelerates near the end of travel. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
The R (M16x1.5) screw shortens the extend stroke by up to 30 mm, allowing on-site tuning between 55 and 85 mm. The -B code denotes a male M18x1.5 piston rod end. This SKU has no magnet, so it cannot use position switches unless upgraded to the -S variant.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.