verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B

The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 45 to 85 mm on the machine — no shims, no part change.

  • BoreØ63 mm
  • Max stroke85 mm
  • Adjustable range45–85 mm
  • Adjuster threadM16×1.5
  • Port sizePT1/4
  • CushionFixed NBR bumper (both ends)
$95.81 $103.31Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ63 stroke, mounting and version on one page All SDAJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B

The AirTAC SDAJ63X85-40B is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjuster screw that dials the extend stop between 45 and 85 mm directly on your machine. The short riveted body minimizes axial mounting depth, fitting where larger profile cylinders cannot.

This specific SKU includes a male M18x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without upgrading to an -S variant. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, with a proof rating of 1.5 MPa across a -20 to +70 C temperature range.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B Technical Specifications

ModelAirtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ63 mm
Max stroke85 mm
Adjustable range45 – 85 mm
Adjuster thread (R)M16×1.5
Port sizePT1/4
Acting typeDouble acting
Rod end threadM10×1.5 F / M18×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B

SDAJCompact double-acting cylinder with adjustable stroke.
63Bore size in mm.
×85Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B Is Used

precision_manufacturing

Tooling Depth Calibration

Dial in the exact 45-85 mm extend stop during initial setup to set precise clamping depth on machining fixtures, absorbing variations without swapping parts.

Is the Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B the Right Cylinder?

When sizing this 63 mm bore actuator, evaluate both neighboring options.

The 40 mm adjustment window is ideal for production lines requiring frequent format changeovers or trial positioning without disassembling hardware. Confirm your required extend length falls within the 45-85 mm range, the PT1/4 air port matches your manifold, and the male M18x1.5 rod end suits your mounting clevis. Note that a plain SDAJ does not hold position if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel. For suspended or vertical loads, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–85 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M16×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B FAQ

The air port is PT1/4.

Turning the external M16x1.5 screw shortens the extend stroke by up to 40 mm, allowing on-machine tuning between 45 and 85 mm. The screw acts only as a mechanical stop and does not alter force or lock the piston mid-stroke; a separate rod lock is required to hold loads without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X85-40B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ63X85-40B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.