
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-100 is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 0 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-100 is a compact double-acting double-rod cylinder featuring an external M16x1.5 adjustment screw that dials the extend stop down to any position between 0 and 90 mm. Retract travel remains at the full 90 mm regardless of the extend setting.
This riveted-body design saves significant axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration relies on a fixed NBR bumper rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 0 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 90 mm to secure raw castings of varying dimensions on a single fixture base without fabricating custom spacer blocks.
Set precise lower stops for divergent pallet layer heights, relying on the fixed NBR bumper to absorb the impact of the 79.4 kg safe vertical load at the end of travel.
Choose this model if your fixture requires frequent on-site endpoint tuning to accommodate varying part heights.
Confirm your parameters: 63 mm bore, 90 mm maximum stroke, 100 mm adjustment window, PT1/4 air port, female M10x1.5 rod thread, and no magnet. Operating speed ranges from 30 to 500 mm/s. Remember that a plain SDAJ does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must resist gravity during a pressure drop, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
Turning the external M16x1.5 screw shortens the extend endpoint anywhere from the full 90 mm down to 0 mm, while retract stays at 90 mm. This specific SKU lacks a piston magnet; to use reed or electronic switches you must select the -S magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.