
The AirTAC SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-30B is a genuine double-acting COMPACT cylinder (Ø63mm bore) whose extend end-position is set by an external M16×1.5 adjustment screw. You can dial the stroke anywhere from 60 to 90 mm on the machine — no shims, no part change.
The AirTAC SDAJ63X90-30B is a compact double-acting double-rod cylinder built for on-site extend positioning. Its M16x1.5 R-screw lets you dial the outward stop from 60 to 90 mm, removing the need for shims or replacement parts during changeovers.
This 63 mm bore unit features a male M18x1.5 piston rod and a PT1/4 air port. The short riveted body minimizes axial mounting depth in tight machinery envelopes. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion, and this specific SKU lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S variant.
| Model | Airtac SDAJ50~63 Adjustable Ultra-Thin Cylinder SDAJ63X90-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Max stroke | 90 mm |
| Adjustable range | 60 – 90 mm |
| Adjuster thread (R) | M16×1.5 |
| Port size | PT1/4 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M10×1.5 F / M18×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×90 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dialing the extend stop between 60 and 90 mm allows precise downward pressing force on varied material thicknesses without swapping tooling.
Stepping down, the SDAJ50 provides 981.7 N, which may be insufficient for heavier fixtures; stepping up, the SDAJ80 yields 2513.3 N for high-mass payloads.
Choose the SDAJ63X90-30B if your fixture requires precise outward stroke tuning between 60 and 90 mm on the machine. Confirm the 63 mm bore, 90 mm maximum stroke, 30 mm window, PT1/4 port, and male M18x1.5 rod thread suit your mounting plate. Note that a standard cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and is not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj63-adjustable-cylinder
Quick checklist
The theoretical maximum push is 318 kgf at 1.0 MPa.
The external M16x1.5 screw mechanically shortens the extend stop from the 90 mm maximum down to 60 mm. It sets the end position without changing the force output, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.