verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB

The AirTAC SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.

  • BoreØ80 mm
  • Max stroke50 mm
  • Adjustable range30–50 mm
  • Adjuster threadM20×1.5
  • Port sizePT3/8
  • CushionFixed NBR bumper (both ends)
$130.70 $138.20Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ80 stroke, mounting and version on one page All SDAJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB

The AirTAC SDAJ80X50-20SB is a compact double-acting double-rod cylinder built for tight axial mounting spaces where round-body or profile units fail to fit. A short riveted body houses an external M20x1.5 adjuster screw, letting you dial the extend stop directly on the machine between 30 and 50 mm without swapping shims or parts.

This specific configuration includes a male M22x1.5 piston rod thread and a built-in magnet for position sensing. End-of-stroke deceleration relies on a fixed NBR bumper, which slows the impact but does not function as an adjustable air cushion.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB Technical Specifications

ModelAirtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ80 mm
Max stroke50 mm
Adjustable range30 – 50 mm
Adjuster thread (R)M20×1.5
Port sizePT3/8
Acting typeDouble acting
Rod end threadM14×1.5 F / M22×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
80Bore size in mm.
×50Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB Is Used

sync_alt

Changeover Actuation

Speed up production line changeovers by turning the external stop screw to shift the extend endpoint, saving axial depth in cramped tooling spaces using the riveted body.

Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB the Right Cylinder?

Choose this model if your fixture requires frequent on-site stroke tuning across the 30-50 mm window. It carries the -S magnet for AirTAC reed or electronic switches and the -B male M22x1.5 rod end. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper and mechanical stop cannot hold a load, so deploy an external rod lock or pilot-operated check valve for suspended masses.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M20×1.5 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB FAQ

It operates between 0.15 and 1.0 MPa, runs at 30-500 mm/s, and accepts a PT3/8 air port.

The included -S magnet works with AirTAC reed or electronic switches mounted in the body grooves for end-position confirmation.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X50-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ80X50-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.