Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S
The AirTAC Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S is a genuine double-acting COMPACT cylinder (Ø80mm bore) whose extend end-position is set by an external M20×1.5 adjustment screw. You can dial the stroke anywhere from 50 to 60 mm on the machine — no shims, no part change.
- BoreØ80 mm
- Max stroke60 mm
- Adjustable range50–60 mm
- Adjuster threadM20×1.5
- Port sizePT3/8
- CushionFixed NBR bumper (both ends)
About the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S
The AirTAC SDAJ80X60-10S is a double-acting compact cylinder featuring an external M20x1.5 adjustment screw that lets you dial the extend stop precisely between 50 and 60 mm directly on the machine. Because the adjuster only sets the mechanical stop rather than altering the piston area, output force remains identical to a standard SDA of this bore, delivering 2513.3 N of push at 0.5 MPa.
Its short riveted body drastically saves axial mounting depth where a larger profile cylinder cannot fit, while the integrated -S piston magnet supports AirTAC reed or electronic solid-state switches for position sensing. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the load but is not an adjustable air cushion.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S Technical Specifications
| Model | Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Max stroke | 60 mm |
| Adjustable range | 50 – 60 mm |
| Adjuster thread (R) | M20×1.5 |
| Port size | PT3/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M14×1.5 F / M22×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. Force is unchanged from a standard SDA of the same bore. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Force matches a standard SDA of the same bore; the adjuster only sets the stop position, not the area. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S Is Used
Heavy Press Tuning
Dial in the exact 50-60 mm extend stop during setup to prevent over-travel on thick materials, utilizing the full 2513.3 N push without changing mounting hardware.
Pallet Diverter Setup
Fine-tune the actuation point on-site to accommodate varying pallet sizes, relying on the fixed NBR bumper to absorb the kinetic energy of heavy redirects.
Vertical Lift Positioning
Adjust the extend limit safely for lifting 128.1 kg loads with a 2:1 margin, knowing the mechanical stop sets the endpoint rather than locking the load mid-stroke.
Is the Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S the Right Cylinder?
When sizing this 80 mm bore, evaluate both neighbours: stepping down to the SDAJ63 yields 1558.6 N push at 0.5 MPa, whereas moving up to the SDAJ100 provides 3917 N. This SDAJ80X60-10S fits applications needing roughly 2513.3 N, offering a safe working load around 1508 N (about 60 percent of the 0.5 MPa figure) or a vertical lift capacity of 128.1 kg with a 2:1 margin.
Choose this specific configuration when production lines require frequent on-machine stroke tuning within the 10 mm window. It features a PT3/8 port, a 25 mm piston rod, and a built-in magnet (S). Remember that a plain cylinder does not hold position on air loss or valve centring; the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 50–60 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M20×1.5 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S FAQ
At 0.5 MPa it provides 2513.3 N push and 2267.8 N pull. At 0.7 MPa it provides 3518.6 N push and 3175 N pull. The theoretical maximum push is 513 kgf at 1.0 MPa.
The M20x1.5 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 50-60 mm without shims. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ80~100 Adjustable Super Slim Cylinder SDAJ80X60-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.